Products
ENERFLOW EH-MT and EHR-MT heat pumps are ideally suited for supplying
hot water for the following applications:
Commercial hot water systems including hotels, hostels, hospitals,
schools, office blocks and universities.
Industrial hot water systems including
change houses, Laundromats, green houses and space heating.
Model EH-MT
This model can be used in areas where the ambient temperature
seldom drops below 3°C. Defrosting of the air heat exchanger is done
by stopping the compressor whilst maintaining airflow through the
coil.
Model EHR-MT
This model can be used at below zero temperatures down to -10°C.
Defrost is accomplished by reversal of the heat pump cycle.
ENERFLOW ED-MT series dual function heat pumps are ideally suited for producing
hot and cold water simultaneously, producing hot water with cold
air as a by-product or producing chilled water with hot air as a
by-product for the following applications:
Food processing industry, industrial hot and cold water systems,
bakeries, dairies.
ENERFLOW EC-MT series water chillers are compact and completely self-contained,
easy to install and easy to maintain. They can also be used to cool
other fluids than water eg. glycol to produce ice. This series
are ideally suited for the following applications:
Industrial cooling, air-conditioning, cooling of injection
moulding or other production machines and cold.
ENERFLOW ER-MT series reverse cycle heat pumps/water chillers
can either heat or cool water for any application where both
heating and cooling is required such as:
Bakeries, dairies, air-conditioning.
ENERFLOW EP-MT series heat pumps have titanium
condensers for both sea- and pool water. They are ideally suited for supplying hot/warm water for
the following applications:
Swimming pools, spas, crocodile farms, fish farms
and abalone farms.
ENERFLOW residential heat pump is ideally suited for supplying
hot water for a household. The unit comes complete with an easy to
operate intelligent wired controller. Thanks to the compact
packaged unit design little work is required during
installation. Water pipe and electrical connections are done
with relative ease.
The modular and mobile ACU offers an
attractive addition and/or alternative to conventional mine
cooling technologies. It is situated underground close to
the location where cooling is required and is a robust, low
maintenance vapour compression heat pump cycle with an
efficiency comparable to that of surface refrigeration
plants.
The ACU extracts heat from the
ventilation air and transfers it to either chilled water or
normal service water. The fact that normal service water can
be used as a heat sink means that in many cases there is no
need or reduced need for a surface refrigeration plant, and
the heat can be rejected to the atmosphere via a cooling
tower. This has a profound impact on the total capital cost
requirement.
Furthermore, since the water temperature
rise through the machine is much larger than that of
conventional cooling cars or spray cars, the water flow rate
required is significantly reduced, thereby drastically
reducing the water pumping power requirement.
|
